DMM Pinto Rig Spacer

14mm wide aluminum spacer designed to work on the DMM Pinto Rig only (it is too wide to fit the smaller Pinto). The spacer is designed to stop the side plates from coming together when excessive load is applied - only applicable when cordage is run through the top connection holes on the pulley - that is, you do not need a spacer if the pulley is attached by carabiner. The spacer fits loosely between the two side plates. The center hole on the spacer can take hardware and soft connections up to 15 mm in diameter.

• Eliminates side plate flex when the DMM Pinto Rig is used on cordage
• Milled to shape of pulley sheave - identified as PUL120-SPA
• Inner diameter of 14 mm can accommodate carabiner bar or ropes up to 14 mm
• Made in Wales

Outer Diameter: 26 mm
Inner Diameter: 15 mm
Thickness: 14.5 mm
Weight: 11 g
Marking: PUL120-SPA